Our A18-grade copper coated double-deoxidised mild steel MIG wire for welding unalloyed and low-alloyed mild and medium tensile steels. Precision layer-wound with a high-quality copper finish for improved feeding. Suitable for use in general fabrication, construction, tanks and boilers, agricultural, auto-body and repair & maintenance applications.
DESCRIPTION
Copper coated double-deoxidised mild steel MIG wire for welding unalloyed and low-alloyed mild and medium tensile steels, for impact toughness down to -20C. Manufactured with a high-quality copper finish for improved feeding. Precision layer wound.
WELDING POSITIONS
Suitable for use in general fabrication, construction, tanks and boilers, repair and auto-body applications. Comprises manganese and silicon to provide good mechanical properties.
MATERIAL TO BE WELDED
Can be used on a wide variety of mild steels, structural steel, fine-grain steel, pipe steel, boiler steel and cast steel.
SHEILDING GAS
CO2 or Argon/CO2
VZ180650L SG2 0.6MM A18 MIG WIRE (5KG) REEL
Our A18-grade copper coated double-deoxidised mild steel MIG wire for welding unalloyed and low-alloyed mild and medium tensile steels. Precision layer-wound with a high-quality copper finish for improved feeding. Suitable for use in general fabrication, construction, tanks and boilers, agricultural, auto-body and repair & maintenance applications.
DESCRIPTION
Copper coated double-deoxidised mild steel MIG wire for welding unalloyed and low-alloyed mild and medium tensile steels, for impact toughness down to -20C. Manufactured with a high-quality copper finish for improved feeding. Precision layer wound.
WELDING POSITIONS
Suitable for use in general fabrication, construction, tanks and boilers, repair and auto-body applications. Comprises manganese and silicon to provide good mechanical properties.
MATERIAL TO BE WELDED
Can be used on a wide variety of mild steels, structural steel, fine-grain steel, pipe steel, boiler steel and cast steel.
SHEILDING GAS
CO2 or Argon/CO2
VZ160607L SG2 0.6MM A18 MIG WIRE (0.7KG) REEL
Our A18-grade copper coated double-deoxidised mild steel MIG wire for welding unalloyed and low-alloyed mild and medium tensile steels. Precision layer-wound with a high-quality copper finish for improved feeding. Suitable for use in general fabrication, construction, tanks and boilers, agricultural, auto-body and repair & maintenance applications.
DESCRIPTION
Copper coated double-deoxidised mild steel MIG wire for welding unalloyed and low-alloyed mild and medium tensile steels, for impact toughness down to -20C. Manufactured with a high-quality copper finish for improved feeding. Precision layer wound.
WELDING POSITIONS
Suitable for use in general fabrication, construction, tanks and boilers, repair and auto-body applications. Comprises manganese and silicon to provide good mechanical properties.
MATERIAL TO BE WELDED
Can be used on a wide variety of mild steels, structural steel, fine-grain steel, pipe steel, boiler steel and cast steel.
SHEILDING GAS
CO2 or Argon/CO2
FXTIPDIP50 Sif Tip Dip Anti Splatter Paste 500g
SIF TIP DIP 500G ANTI-SPATTER
|
|
|
 |
Anti-spatter paste to protect MIG welding torches, jigs and fixtures. Reduces the effects of weld spatter. Protects and prolongs the life of Mig nozzles, contact tips, jigs and fixtures. Will not clog threads, or cause porosity regardless of amount used. Non-toxic, non-flammable, odourless, contains no harmful hydro-carbons, silicone-free. . |
|
|
|
|
|
|||
| Part Num: | FXTIPDIP50 | Weight: | 0.5 kg |
| Category: | MIG WELDING | Voltage: | n/a |
| View More: | tip-dip gel | Unit: | EACH |
| Product/Sales Information | Min Quantity: | 1 | |
| Login to Download MSDS | Form: | Paste/Gel | |
| Standard: | Proprietary Formula | Colour: | Red |
PRODUCT INFORMATION
SIF TIPDIP ANIT-SPATTER FXTIPDIP22 / FXTIPDIP50
SUMMARY
Reduces the effects of weld spatter. Protects and prolongs the
life of Mig nozzles, contact tips, jigs and fixtures. Will not clog
threads, or cause porosity regardless of amount used. Non-toxic,
non-flammable, odourless, contains no harmful hydro-carbons,
silicone-free.
TARGET APPLICATIONS
Simply dip the welding nozzle and contact tip into the tip dip tin
and coat the inside of the nozzle with a spatter resistant coating.
Use frequently as the coating dries out with use.
FURTHER INFORMATION
TIP DIP gel is used in MIG welding to help prevent the build-up of welding spatter on your contact tips and shrouds.
Spatter build-up can clog your torch and restrict the flow of shielding gas. This can result in contamination of your MIG
weld. SIF TIP DIP is supplied in hard-wearing tins – ideal for use in workshop environments. Just dip your warm MIG
torch into the gel to protect it. The gel is a red colour and contains no harmful solvents, which can smoke and fume. Nontoxic,
non-flammable, silicone free.
ARTICLES & ACCESSORIES TECHNICAL SPECIFICATION
Part Number Product Description
FXTIPDIP22 SIF TIP DIP 225G Anti-Spatter
FXTIPDIP50 SIF TIP DIP 500G Anti-Spatter
Form Paste/Gel
Colour Red
Odour None
Boiling Point 300˚C
EG1001w Water Based Anti-Splatter Spray 400ml
A water based, silicone-free, non-toxic, non-flammable anti-splatter solution, used to prolong tip and shroud life and to prevent adhesion of weld splatter to the area surrounding the weld zone.
AU300 Flow Meter 0-25 Litres per minute
Flowmeter designed to be fitted to the outlet of an Argon or CO2 regulator to provide greater control of the flow of your shielding gas through the gas line. 2 models are available, with either 0-15L per minute or 0-25L per minute
AEARGBN Argon to CO2 Adaptor
CYLINDER ADAPTOR
|
|
|
 |
Argon cylinders have a 5/8 BSP, RH thread female outlet connection and the regulator has a matching male bullnose, whereas CO2 cylinders have a 5/8 BSP, RH thread male outlet connection and the regulator has a matching female nut. This adaptor allows an argon regulator to connect to a CO2 cylinder. |
|
|
|
|
|
|||
| Part Num: | AEARGBN | Weight: | 0.2 kg |
| Category: | OXY/FUEL WELD / CUT | Voltage: | n/a |
| View More: | cylinder adaptors | Unit: | EACH |
| Login to Download MSDS | Min Quantity: | 1 | |
| n/a | Thread: | 3/8 BSP RH | |
AECO2BN CO2 to Argon Adaptor
GAS BOTTLE ADAPTOR CO2 TO AR
|
|
|
 |
The CO2 To Argon Adaptor is used to connect a CO2 regulator to an argon cylinder outlet. The double-threaded brass adaptor has a CO2 bottle fitting at the top, which connects to the nut on the regulator inlet, and a fitting at the bottom, which screws in to an argon bottle. |
|
|
|
|
|
|||
| Part Num: | AECO2BN | Weight: | 0.145 kg |
| Category: | MIG Welding | Voltage: | n/a |
| View More: | cylinder adaptors | Unit: | EACH |
| Login to Download MSDS | Min Quantity: | 1 | |
| n/a | |||
DZ205001 Tri Flint Spark Lighter
Popular design of quality spring steel spark lighter, features a triple-flint strike action. Flints included, spares available as packs of 10.
AU111002 DGN BARREL, OXYGEN FLASH BACK ARRESTOR
Non resettable FBA for high flow Oxy/Fuel cutting and welding. Will withstand a series of minor flash backs but will not react as a consequence of external heat. Can be connected in parellel for greater flow
AE3004LX FIRST STAGE, TWIN GUAGE OXYGEN REGULATOR
Nitrogen 9.4L 137bar – for racing teams
Nitrogen 9.4L 137bar, – for racing teams
- Cylinder content 9L at 137bar @ 15C
- Cylinder size 76cm * 15cm
- Thread Type: BS341 No3 5/8″ INT
- Cylinder content 1.2m3
- Purity 99.995%
- Our cylinders are equivilant to 21 x 600ml disposable cylinders or 13 x 1L disposable cylinders.
- They use the same regulator fittings as BOC, Air products and Air liquid
- No bottle rental
- No environmental charges
- No fees to come and collect a cylinder
- Refundable deposit of £55.00, which is fully refundable on return of cylinder at any point in time
For deliveries throughout the UK, please use our stockist locator map to find you nearest stockist. If there is no suitable stockist please call us to arrange a courier delivery
Please note
All cylinders are owned , maintained and tested by Adams gas and are never at any point owned by the user. To check the test date of a cylinder, please look at the coloured ring around the gas valve.
The deposit on the cylinder is held by Adams gas and is fully refundable on return of the cylinder, at any point and is not subject to a limited time frame.
The deposit will only be refunded to the account holder, should the cylinder be passed on to a third party, please notify us to avoid any confusion later on.
Applications and Users
- Motor Racing Teams
- tyre inflation
- shock absorber filling
* Bottle dimension and weight can vary depending whether you receive an aluminium or steel cylinder, but average cylinder content is maintained
Nitrogen 2L 200bar – for racing teams
Nitrogen 2L 200bar, for racing teams
- Cylinder content 2L at 200bar @ 15C
- Thread Type: BS341 No3 5/8″ INT
- Cylinder size 45cm * 10cm
- Cylinder content 0.42m3
- Purity 99.995%
- Our cylinders are equivilant to 21 x 600ml disposable cylinders or 13 x 1L disposable cylinders.
- They use the same regulator fittings as BOC, Air products and Air liquide
- No bottle rental
- No environmental charges
- No fees to come and collect a cylinder
- Refundable deposit of £25.00, which is fully refundable on return of cylinder at any point in time
For deliveries throughout the UK, please use our stockist locator mapto find you nearest stockist. If there is no suitable stockist please call us to arrange a courier delivery
Please note
All cylinders are owned , maintained and tested by Adams gas and are never at any point owned by the user. To check the test date of a cylinder, please look at the coloured ring around the gas valve.
The deposit on the cylinder is held by Adams gas and is fully refundable on return of the cylinder, at any point and is not subject to a limited time frame.
The deposit will only be refunded to the account holder, should the cylinder be passed on to a third party, please notify us to avoid any confusion later on.
Applications and Users
- Motor Racing Teams
- Tyre inflation
- shock absorber filling
* Bottle dimension and weight can vary depending whether you receive an aluminium or steel cylinder, but average cylinder content is maintained